Italiano
CompanyCertificationsEngineeringKnow HowQuality ControlProductsContactNewsHome
Home - Products
Product 01
(click on the picture to see it enlarged and to see the product specifications)
Product description:
Material: 39 NiCrMo3
•  Carried out: turning, threads M20x1.5, M16x1.5 and eccentric at 15° in phase with slot of 10 H8.
•  Carried out: n. 2 holes at 90° on thread M16x1.5
•  Various grindings were carried out with roughness 0.6 ÷ 0.8
Product 02
(click on the picture to see it enlarged and to see the product specifications)
Product description:
Material: 18 NiCrMo5
•  Complete turning was carried out
•  DIN 5480 gear cutting was carried out
  Module: 2
Pressure angle: 30°
N. teeth: 13
•  DIN 5480 gear cutting was carried out
  Module: 2
Pressure angle: 30°
N. teeth: 16
•  1'' 3/8 gear cutting was carried out
  Module: 5.5267
Pressure angle: 30°
N. teeth: 6
•  N. 6 recesses Ø 8 H15 carried out
•  Heat treatment carried out c.t.r. (casehardening, hardening, tempering).
depth 0.4 - 0.6 MM
HRC = 60 ÷ 62
•  Straightening was carried out
•  Galvanising was carried out, according to the customer's specifications
•  Various grindings were carried out with roughness 0.4 ÷ 0.6
Product 03
(click on the picture to see it enlarged and to see the product specifications)
Product description:
Material: 20 MNCR 5
•  Turning + thread M 22 x 1.5 were carried out
•  N. 2 slots 8 N9 were carried out
•  Gear cutting was carried out
Module: 2.5
Propeller inclination angle: 10° right (DX)
N. teeth: 18
•  Gear cutting was carried out
Module: 2.5
Propeller inclination angle: 10° left (SX)
N. teeth: 15
•  Heat treatment carried out c.t.r. (casehardening, hardening, tempering).
Casehardening depth 0.4 ÷ 0.6 mm
Hardness 60 ± 2 HRC
•  Straightening was carried out
•  Various grindings were carried out with roughness 0.6÷ 0.8
Product 04
(click on the picture to see it enlarged and to see the product specifications)
Product description:
Material: 18 NiCrMo5
•  Complete turning was carried out
•  85x79 DIN 5482 gear cutting was carried out
  Module: 2.25
Pressure angle: 30°
N. teeth: 38
•  1" 3/8 gear cutting was carried out
  Module: 5.5267
Pressure angle: 30°
N. teeth: 6
•  36x40 DIN 54 82 internal gear cutting was carried out
  Module: 1.9
Pressure angle: 30°
N. teeth: 20
•  Drilling carried out in phase with gear cutting Ø 7.25
•  Heat treatment carried out c.t.r. (casehardening, hardening, tempering).
depth 0.8 - 1 MM
HRC = 58 ÷ 60
•  Straightening was carried out
•  Grinding was carried out on diameters with roughness 0.4 ÷ 0.6
Product 05
(click on the picture to see it enlarged and to see the product specifications)
Product description:
Material: 16 CrNi4
•  Complete turning was carried out
•  1"3/4 gear cutting was carried out
  N. teeth: 6
•  55 x 50 DIN 5482 gear cutting was carried out
  Module: 2
Pressure angle: 30°
N. teeth: 26
•  1"3/8 gear cutting was carried out
  Module: 5.5267
Pressure angle: 30°
N. teeth: 6
•  Heat treatment carried out c.t.r. (casehardening, hardening, tempering).
depth 0.4 - 0.6 MM
HRC = 59 ÷ 61
•  Straightening was carried out
•  Grinding on diameters with roughness 0.6 ÷ 0.8 was carried out
Product 06
(click on the picture to see it enlarged and to see the product specifications)
Product description:
Material: 42 CrMo4 hardened and tempered
•  Complete turning + thread M25 x 1.5 were carried out
•  36 x 40 DIN 5482 gear cutting was carried out
  Module: 1.9
Pressure angle: 30°
N. teeth: 20
•  30 x 27 DIN 5482 gear cutting was carried out
  Module: 1.75
Pressure angle: 30°
N. teeth: 16
•  Milling of board was carried out with 1° 25' inclination in phase with gear cutting space 36 x 40 and 12 threaded holes M 12 x 1.25
•  Hole Ø 8 H12 and Ø 4 on external thread M 25 x 1.5 was carried out
•  Various grindings were carried out with roughness 0.6 ÷ 0.8
Product 07
(click on the picture to see it enlarged and to see the product specifications)
Product description:
Material: 42 CrMo4 hardened and tempered
•  Complete turning with thread 55 x 2 and 60 x 2 was carried out
•  Milling 18 H8 and 8 H8 on thread was carried out
•  56 x 65 UNI 8953 gear cutting was carried out
•  Grinding on various diameters with roughness 0.6 ÷ 0.8 was carried out
CompanyCertificationsEngineeringKnow HowQuality ControlProductsContactNewsHomeTop of the page
 
Torneria Zanichelli Giovanni S.r.l.
Sede amministrativa e produzione:
Via Allegri, 12 - 42028 Poviglio (Reggio Emilia) - Italy
Sede ricevimento merci:
Via Mazzini, 8 - 42028 Poviglio (Reggio Emilia) - Italy
Tel. +39.0522.969785 - Fax +39.0522.960190
P.IVA: 01515910352
E-mail: info@torneria-zanichelli.it


Web design by Campbell adv
For a correct view of all web-site
parts you need Macromedia Flash Player.
If do not have it, unload it here
For a correct view of all web-site parts you need Macromedia Flash Player. If do not have it, unload it here.
 
click on the picture to see it enlarged and to see the product specifications click on the picture to see it enlarged and to see the product specifications click on the picture to see it enlarged and to see the product specifications click on the picture to see it enlarged and to see the product specifications click on the picture to see it enlarged and to see the product specifications click on the picture to see it enlarged and to see the product specifications click on the picture to see it enlarged and to see the product specifications